Operating a road roller may seem complicated, but following standardized procedures ensures safe work. Here’s a beginner-friendly guide to ensure safe and efficient road roller operation, with key steps to master:
1. Wear Full Safety Equipment
Always don protective gear like helmets, goggles, and reflective workwear before operation. As the foundation of road roller operation, compliant gear reduces 90%+ operation risks and is a must for all operators.
2. Thoroughly Inspect the Road Roller
Check for hydraulic leaks, tire pressure, and instrument abnormalities before starting. A 10-minute comprehensive inspection prevents sudden failures during road roller operation and ensures compaction quality. Report any component issues immediately.
3. Properly Start the Ignition
Insert the key but don’t start right away—confirm the gear is in neutral. After the instrument self-check, turn the key smoothly to ignite. Meanwhile, verify that the vibration frequency settings on the road roller operation panel match the working conditions to avoid affecting compaction quality due to wrong parameters.
4. Precisely Control Speed and Direction
The core of road roller operation lies in manipulating the gearshift and steering wheel:
· The gearshift handle integrates forward/backward switches; the larger the deflection angle, the faster the speed.
· Operate the steering wheel smoothly and reduce speed for sharp turns to prevent equipment rollover.
Maintain a uniform speed to ensure even compaction force.
5. Standard Activation of Vibration Function
If activating vibration, select the corresponding frequency gear on the control panel. Note:
· Avoid frequent on/off of the vibration button to prevent hydraulic overload.
· Confirm vibration takes effect via body feedback before starting compaction.
This step is key to improving compaction efficiency in road roller operation.
6. Dynamic Monitoring During Operation
Continuously observe compaction effects while driving, adjusting speed and vibration parameters based on soil/asphalt conditions. The essence of road roller operation lies in flexibly adapting to working conditions, not rigidly following procedures.
7. Post-Operation Shutdown and Maintenance
After work, park the equipment on level ground, turn off all function switches, and engage the handbrake. Promptly clean asphalt/soil accumulation on the drum surface to prepare for the next road roller operation.
Key Reminder:
Every step of road roller operation requires focus. If unfamiliar with the equipment, refer to the model manual or consult professionals. Standard operation not only ensures safety but also significantly extends equipment lifespan.